ZJA SERIES ZJA13-1310
-Product application
Deep hole drilling machines are mainly used in the industries as following:
Mould industry: water line hole, thimble hole, ejection pin hole, electric hole, and inclined hole, etc.
-Hydraulic machinery industry: valve, distributor and pump, etc..
-Automotive industry: cylinder, fuel supply system, and other parts
-Aerospace industry: the propeller, landing gear, and other parts.
-Chemical and generator industry: heat exchange parts.
Technical Parameter
| Items | Contents | |
| Processing capacity | Drilling aperture range | φ3~φ32mm |
| Max. drilling depth | 1300mm | |
| Processing range | X axis processing range | 1300mm |
| Y-axis processing range | 1000mm | |
| Working table | Dimension of the working table | 900×1500mm |
| Max. Loading capacity | 8Ton | |
| Processing speed | Max. Speed of spindle | 4500r/min |
| Feed speed | 3000mm/min | |
| Power parameter | Spindle servo motor | 7.5KW |
| X-axis servo motor | 15N.m | |
| Y-axis servo motor | 15N.m | |
| Z-axis servo motor | 10N.m | |
| Total power | 28KW | |
| Cooling system | Max. The pressure of cooling system | 100kg/cm2 |
| Max. The flux of coolant liquid | 85L/min | |
| The capacity of cutting oil tank | 600L | |
| Precision parameter | Aperture precision | IT8~IT11 |
| The harshness of Hole Surface | Ra ≤3.2μm | |
| Tolerance | 0.5/500(S45#,10mm) | |
| Others | Weight | 11Ton |
| The floor area of machine(Length*Width) | 4500×3500mm | |
| Height | 2800 mm | |
It is a special deep hole drilling operating system, which is powerful, simple operating, stable and durable. Main advantages:
1. Multi-segments processing automatically: It will adjust the feed rate automatically according to the processing schedule.
2.Logical control processing: The processing situation is monitored and the processing specification will be adjusted automatically if any unusual.
3.The highly sensitive monitoring equipment will sound an alarm if any unusual errors and stop processing, which is safe and found intuitively.
4.Multiple operations. There are optional modes: man-machine dialogue mode, machine programming mode, and remote transmission mode.
